From ThorstensHome
Revision as of 10:16, 10 June 2012 by WikiSysop (Talk)

Jump to: navigation, search

The computer that I call Arlt 2001 has been built by Arlt in 2001. It has a floppy disk drive, an RS232 connector and cannot boot from USB. It is a 32bit compi.

I cannot boot it with Ubuntu 10.11, the monitor does not work then. I cannot install SUSE 12.1, the monitor does not work then. The only way to start it that I found so far is with a Knoppix 6.7 CD, fb800x600 mode.

Installing Knoppix 7.02

I can use this computer with Knoppix 7.02 if I start it with the option


So on 2012-06-09 I installed Knoppix 7.02 on harddisk. But now the option fb1280x1024 is no longer selectable and when starting, the monitor remains black with a message "unsupported mode". So the question is how do I get Knoppix on harddisk started as if I had started it from DVD with the option fb1280x1024.

To find this out I start Knoppix 7.02 from DVD, choose fb1280x1024 as boot option and look at the what parameters the bootloader/initrd were using to start the kernel:

# cat /proc/cmdline 
ramdisk_size=100000 lang=en apm=power-off vga=794 video=1280x1024 xmodule=fbdev initrd=minirt.gz nomce libata.force=noncq hpsa.hpsa_allow_any=1 loglevel=1 tz=localtime BOOT_IMAGE=linux 

Now if I add the boot parameters vga=794 video=1280x1024 xmodule=fbdev Knoppix boots perfectly from harddisk. In order not to have to add it on every boot, I add it in the file /boot/grub/menu.lst. Ready. The computer starts Knoppix without any intervention from harddisk.

Installing Windows 95

To install Windows 95 on it, you will need a Windows 95 boot floppy, a Windows 95 boot CD (I got mine from eBay) and a registration code.

  • boot from floppy
  • fdisk c:
  • format c:
  • change drive to s:
  • call setup.exe

See also