Difference between revisions of "Control an LED via USB/RS232 adapter"

From ThorstensHome
Jump to: navigation, search
 
Line 2: Line 2:
  
 
<pic src=http://www.staerk.de/thorsten/images/0/0f/Led-on-rs232.png width=30% align=auto />
 
<pic src=http://www.staerk.de/thorsten/images/0/0f/Led-on-rs232.png width=30% align=auto />
 +
 
Here is how it works:
 
Here is how it works:
 
* Connect your USB to serial adapter to your computer.  
 
* Connect your USB to serial adapter to your computer.  

Latest revision as of 20:45, 1 February 2015

Today I lighted an LED using my USB to serial adapter. Here is how it looks:

Here is how it works:

  • Connect your USB to serial adapter to your computer.
  • Find out what device name it got using dmesg:
[29231.270163] usb 2-1.6: pl2303 converter now attached to ttyUSB0
in this case it is /dev/ttyUSB0
import serial, time
conn = serial.Serial('/dev/ttyUSB0',
                    baudrate=9600,
                    bytesize=serial.EIGHTBITS,
                    parity=serial.PARITY_NONE,
                    stopbits=serial.STOPBITS_ONE,
                    timeout=1,
                    xonxoff=0,
                    rtscts=0)
conn.setBreak(True) 
  • know that you can probably hold an LED directly to the pins as they should contain current limiters.
  • know that PIN 5 holds 0V and all other PINs hold 0V or +5V usually
  • So risk it and hold the long pin (plus) to PIN 3 and the short one to PIN 5

If I connect RI and TXD then via an LED it shines, plus RI's state, read by python, turns from off to on.

See also