Difference between revisions of "Raspberry pi"

From ThorstensHome
Jump to: navigation, search
Line 2: Line 2:
  
 
= Connect it to a monitor =
 
= Connect it to a monitor =
You can connect your raspberry pi to a HDMI monitor using an HDMI cable. In this case the resolution will be great.
+
You can connect your raspberry pi to a HDMI monitor using an HDMI cable giving you a great resolution.
You can also use the composite cable. In this case the resolution will be medium.
+
You can also use the composite port on the device. In this case the resolution will be medium.
 
Take care that you do not buy a HDMI -> VGA adapter and try to use a VGA monitor. VGA is analog, HDMI is digital. This means you will need a HDMI -> VGA ''connector'' not ''adapter''. This difference can easily cost you some weeks of waiting for a device which will prove worthless in the end.
 
Take care that you do not buy a HDMI -> VGA adapter and try to use a VGA monitor. VGA is analog, HDMI is digital. This means you will need a HDMI -> VGA ''connector'' not ''adapter''. This difference can easily cost you some weeks of waiting for a device which will prove worthless in the end.
  

Revision as of 16:34, 12 July 2013

I got myself a RaspBerry Pi. This article is about the things that I learned.

Contents

Connect it to a monitor

You can connect your raspberry pi to a HDMI monitor using an HDMI cable giving you a great resolution. You can also use the composite port on the device. In this case the resolution will be medium. Take care that you do not buy a HDMI -> VGA adapter and try to use a VGA monitor. VGA is analog, HDMI is digital. This means you will need a HDMI -> VGA connector not adapter. This difference can easily cost you some weeks of waiting for a device which will prove worthless in the end.

No start without bootable SD card

When I got my Pi, I just started it to see if it works. I did not have an SD card in it and I expected it to show

No bootable medium found

Or something similar. Beware! The Pi will not even start without a bootable SD card in it. Also an SD card that is not bootable does not help. Do not send the Pi back, create a bootable SD card and boot from it.

Create a bootable SD card

http://www.raspberrypi.org/quick-start-guide is incomplete, it does not tell you how to dump your file to SD card, here is how I tried:

dd if=2012-12-16-wheezy-raspbian.img of=/dev/sdc

This worked, the OS came up.

Password

User is pi, password is raspberry

Network

Playing with it in the default config:

tweedleburg:~ # nmap 192.168.178.0/24

Starting Nmap 6.01 ( http://nmap.org ) at 2013-05-23 17:51 CEST
[...]

Nmap scan report for 192.168.178.43
Host is up (0.0036s latency).
Not shown: 999 closed ports
PORT   STATE SERVICE
22/tcp open  ssh
MAC Address: B8:27:EB:06:57:BA (Raspberry Pi Foundation)

NFS Server

Using it as NFS Server I get 8 MB/s when writing on it using the command

dd if=/dev/zero of=datei bs=4096 count=10000

Interfaces

  • 1 micro-USB for power supply
  • 1 HDMI for video out
  • 1 yellow composite video out

ideas what to do with it

See also